今回のWSのテーマのひとつである災害時におけるデジタルファブリケーションについて考えました。災害発生後、被災地での生活時、その場にいる誰もが簡単に組み立てられ、安全に使用できる物を考えなければいけないと考えました。材料のコストや量、制作物の実用性、仮設性を一番に考えなければならない今のような状況なので形態はまだシンプルなものしか考えられていませんが、デジタルツールでしか実現できないような災害時に対応した成果物を作り上げていきたいです。積層の仕方に関しては前回のC班のものを参考にしようと思っています。
豊田先生、堀川先生ご迷惑をおかけしました。
東京理科大学 ４年 木村一心
One of our toipc "stackable" is met with this idea which is good. Although you still haven't provide how you are stacking this small boards which will be the main issue for this idea.
ReplyDeleteAnd it seems like you are misunderstanding the condition which I listed about how you have to stack the unit. What I mean by stack vertically is that you have to stack the shelter unit on top of another shelter unit.
(平面上に４つスタックするのではなく、２つを平面上に並べ、その上にさらに２つスタックしてください)
One more thing, please consider the maximum size of the material. Maximum size for each board will be 450 * 800 or 300 * 600 (depends which lasercut you use).
You can ask Inoue-kun and Kojima-kun for help to strengthen your idea since they were in team C in the last workshop.
Thank you for advice.
ReplyDeleteThe vertical accumulation of the unit though the question.
It was written, " Please make 4 units of this capsule unit (each about 1m x 1m x 2m size) stacked horizontally and vertically within 2m x 2m x 2m for the final" in the condition of C team in the mail gotten from Mr. Horikawa before.
I thought that the building height restriction was exceeded if the unit was piled up.
sorry i should have written the dimension clearly.
ReplyDeletewhat we meant by 1m x 1m x 2m is that it is width x height x depth. Please ask us any questions if you have anything else.